Feed - Advancing The Media C4 - GRAPHTEC FC4100 series User Manual

FEED - Advancing the Media
The FEED function is used to prevent the loaded media from slipping by automatically advancing
the media to impress the media with grit roller marks, then returning the media to its original
position.
If you are aware of how long media is going to be used for the next cutting, advance the media
prior to starting cutting by this function. Otherwise enable AUTO PRE FEED FUNCTION.
CAUTION: Do not use the FEED function with media that is shorter than 1 meter. If the FEED
LENGTH setting exceeds the actual length of loaded media, the media will fall out
in front of the plotter. If this happens, shorten the FEED LENGTH.
Press the MENU key to select MENU mode.
Press the NEXT key.
Press the F4 key to select FEED.
Press the UP and DOWN ARROW keys to get
desired FEED LENGTH.
Press the ENTER key to register your settings.
The plotter starts feeding as soon as the ENTER key is pressed.
Press the MENU key to cancel MENU mode.
Advanced Functions and Settings ♦ C4 - 8
PEN UP/DOWN>
BUFFER CLEAR>
FEED>
FEED LENGTH
1 m