GRAPHTEC FC4100 series User Manual page 143

Main Specifications: FC4100-100
CPU
Configuration
Drive
Maximum cutting area
Guaranteed precision cutting
area
Compatible media width
Maximum cutting speed
Cutting pressure
Minimum character size
Mechanical resolution
Programmable resolution
Number of cutters/pens
Cutter types
Pen types
Pounce types
Compatible media
Standard interfaces
Buffer memory
Resident command sets
LCD Panel
Compatible paper for pouncing
Power supply
Power consumption
Operating environment
External dimensions
Weight
1 When using Graphtec-specified media
2 HP-GL is a trademark of Hewlett-Packard Company
3 Using CB15U-K30 blades to cut sandblast rubber
16-Bit
Grit-rolling cutting plotter
Digital Servo
1067 mm (42 in.)
9 m (30 ft.) with approved media
1173 mm (46.2 in.)
900 mm/sec with Firmware version 1.12 or before.
1260 mm/sec with Firmware version 1.13 or later.
350 g
3 mm (0.125 in.) alphanumeric Helvetica med. Font
0.005 mm (0.0002 in.)
GP-GL: 0.01 mm (0.0004 in.) and HP-GL
(0.001in.)
1
Supersteel, ceramic and sapphire blades
Water and oil based fiber-tip, water based ballpoint, ceramic,
refillable ink, and disposable ink pens
1.2 mm diameter pin
Mono-vinyl chloride media, fluorescent media, and media for
illuminated displays, high reflective media
thick, Sandblast rubber up to 1mm thick
RS-232C, Centronics-compatible parallel
1 Mb
2
HP-GL™ , GP-GL
20 characters x 4 lines: Supports 12 languages: Danish,
Dutch, English, French, German, Hungarian, Italian,
Japanese, Norwegian, Portuguese, Spanish, Swedish
Regular paper from 0.06 to 0.13 mm thick
100-240 VAC/48-62 Hz Universal Power Supply
90 VA max.
Temperature: +10 º C to +35 º C (50 º F to 95 º F)
Humidity 35 % to 75 % (non-condensing)
1385 mm (w) x 1207 mm (h) x 623 mm (d) max. with stand
54.5 in. (w) x 47.5 in.
Approximately 52 kg (115 lb.) [with the Stand and Accuload
installed]
Specifications ♦ C8 - 2
1
TM 2
: 0.025 mm
1
, up to 0.25 mm
3
(h) x 24.5 in. (d) max. with stand