GRAPHTEC FC4100 series User Manual page 105

Pinch Roller Sensor Control
This function allows you to disable the pinch roller position sensor function which is performed
after selecting the media type during the plotter's initialization.
When ENABLED is selected, the pinch roller position sensor is performed.
When DISABLED is selected, the pinch roller position sensor will not perform.
In cases where the media length is disabled, the pen carriage may go beyond the edge of the
media. Always set the AREA function to limit the cut area and to protect the cutting mat from
damage.
Press the F3 key to select ENABLED.
Press the F4 key to select DISABLED.
An asterisk appears beside your choice
Press the ENTER key to register your setting and to
proceed to the next menu.
Press the NEXT key if you wish to bypass this setting
with no changes.
If you do not wish to make any changes on the background
settings, turn off the plotter.
Background Settings ♦ C5 - 7
PINCH ROLLER SENSOR
LANGUAGE SELECTION
[ English
ENABLED\ \
DISABLED
]