GRAPHTEC FC4100 series User Manual page 160

FC4100 Media Roll Holder Option
The FC4100 Media Roll Holder allows multiple roll capabilities and easy storage of your common
media colors.
The Media Roll Holder is option in the FC4100-75, FC4100-100 and FC4100-130.
To use the media stored in the Media Roll Holder, you must.
1. First remove the roll of media from your Accuload™ system.
2. Load the Media using the outside Accuload™ roller as an idler.
3. Make sure to feed the media correctly.
4. Make sure to move the roll holders closer together as the rolls become smaller.
5. Make sure to load rolls or logs of media using the top position first, then middle and finally the
bottom position.
6. Make sure the diameter of the media is no larger than 6 inches.
CAUTION: Removing the plotter from the stand when the conveyor rollers are loaded will cause
the unit to become unstable and tip over.
Load the Media
using the outside
Accuload™ roller
as an idler.
Options ♦ C9 - 12