Daily Maintenance
During the course of daily plotter operation, be sure to observe the following precautions:
n
Never lubricate the mechanisms of the plotter.
n
Clean the plotter's casing using a dry cloth that has been moistened in a neutral
detergent diluted with water. Never use thinner, benzene, alcohol, or similar solvents
to clean the casings; they will damage the casing's finish.
n
Clean the cutting mat using a dry cloth. In case of stubborn stains, use a cloth that
has been moistened in alcohol or in a neutral detergent diluted with water.
n
Clean the plotter's paper sensors using a cloth moistened in a neutral detergent
diluted with water. Never use thinner, benzene, alcohol, or similar solvents to clean
the sensors; they will damage the sensors.
Storing the Plotter
When your plotter is not being used, be sure to observe the following points:
n
Remove the pen attached to the penholder.
n
Cover the plotter with a cloth to protect it from dust and dirt.
n
Do not store the plotter in direct sunlight or high temperature.
Special Precautions ♦ SP - 8