Toshiba T3200 User Manual page 94

3. COpy Selection
(1) When COpy is selected, the following message will appear.
DIAGNOSTICS - COPY
Type select (O:2DD-2DD,1:2D-04D,2:2D-08DE,3:2HD-08DE)
?
(2) Select a media/dr i ve type number. Type the number. The
following message will then appear.
Insert source disk into drive A
Press any key when ready.
(3) Remove the diagnostics disk from the FDD and insert the
source disk; press any key. The Copy started message will
then appear. After that, the following message will
appear.
Insert target disk into drive A
Press any key when ready.
(4) Remove the source disk from the FDD and insert the work
disk (formatted); press any key. When coping can not be
done with one operation, message (2) is displayed again.
Repeat the operation. After the floppy disk has been
copied, the following message will appear.
Copy complete
Another copy (1:Yes/2:No) ?
(5) If you type 1 the display will return to the message in
(1) above. If you type 2 the display will return to the
DIAGNOSTICS MENU.
3-39