Toshiba T3200 User Manual page 79

3.13 NDP TEST
Note: This test cannot be run if there is no NDP mounted on the
system PCB.
Subtest 01 NDP test (Execution time: 1 second)
This test checks the control word, status word, bus,
and addition/multiplication functions.
3.14 EXPARSION UNIT TEST
Note: If there is no expansion box connected to the system, this
test cannot be executed.
Subtest 01 Box wrap around
seconds)
(8 bits bus) (Execution time: 3
Note: As this test required a special tool to be executed,
it can not be carried out here.
Subtest 02 Box mono video ram (Execution time: 1 second)
Note: If there is no monochrome display card in the
expansion box, this test cannot be executed.
This test writes data (FF, AA, 55, OOH) into the
monochrome display memory (BOOOOH to BOF9FH), then
reads the data out and compares it to the original
data.
Subtest 03 Wrap around test (16 bit bus)
Note: As this test required a special tool to be executed,
it can not be carried out here.
3-24