Toshiba T3200 User Manual page 111

4.
7 REMOVING/REPLACING THE KEYBOARD UNIT
1. Confirm that the POWER switch is off and unplug the ac cord.
2. Open the plasma display, then remove the two mask panels (A)
by using bladehead screwdriver.
3. Remove the two screws (B) located beneath the two mask
panels and lift up the keyboard unit (C).
4. Release the pressure plate (0) of connector PJ 3 to
disconnect the keyboard cable (E) from the system PCB (F).
FIGURE 4-10 Removing the Keyboard unit
5. To install a keyboard unit, follow the above procedures in
reverse.
4-10