6.
Open the plasma display, then remove the PDP, the indicator
PCB and cable guide as directed in part 4.3, 4.4 and 4.5.
7.
Remove the keyboard unit as directed in part 4.7.
8.
To remove the top cover (H), pass the four cable (1) through
a slit
(J)
of the top cover.
At this time, remove the connector panel (K) from the top
cover.
(K)
~
(J)
FIGURE 4-3 Removing the Top Cover
9.
To install a top cover, follow the above procedures in
reverse.
4-4