Toshiba T3200 User Manual page 15

Insert the diagnostics disk into the FDD.
System normal
Perform FDD problem isolation
~_N...,;.o_
... , procedures in part
2.5.
After confirming which diagnostic
test caused an error to be
--:>-----l., genera ted. Perform the re 1 evant
Yes
problem isolation procedures, as
indicated below.
1. If an error is generated on the system test, memory test,
display test and real timer test, go to system PCB isolation
procedures in part 2.4.
2. If an error is generated on the hard disk test, go to HDD
isolation procedures in part 2.6.
3. If an error is generated on the keyboard test, go to
keyboard isolation procedures in part 2.8.
4. If an error is generated on the floppy disk test, go to FDD
isolation procedures in part 2.5.
2-3