Toshiba T3200 User Manual page 72

3.8 FLOPPY DISK TEST
CAUTION: Before running the floppy disk test prepare a formatted
work disk and remove the diagnostics disk then insert
the work disk to the FDD.
Subtest 01 Sequential read (Execution time: 50 seconds)
This test performs a cyclic redundancy check with a
continuous read operation of all track on a floppy
disk.
2D (Double-sided, double density): Track 0 to 39
2DD (Double-sided, double density, double track):
Track 0 to 79
Subtest 02 Sequential read/write (Execution time: 115 seconds)
This test writes data to all tracks (as defined
above) continuously and then reads the data out and
compares it to original data.
(The data pattern is B5ADADH repeated.)
Subtest 03 Random address/data (Execution time: 12 seconds)
This test writes random data to random address on
all tracks (as defined in subtest 01) and then reads
the data out and compares it with the original data.
Subtest 04 Write specified address (Execution time: 1 second)
This test writes data specified by keyboard to
tracks, heads, and address specified by the
keyboard.
Subtest 05 Read specified address (Execution time: 1 second)
This test reads data from tracks, heads, and address
specified by keyboard.
3-17