Toshiba T3200 User Manual page 109

6. To install an indicator PCB and cable guide, follow the
previous page procedures in reverse.
Note: When put the four cables through cable guide, be
careful as following items.
(1) Put plasma display power cable
(J)
to your right, and
plasma ground cable (K), indicator cable (L) and plasma
display signal cable (M) to your left as shown in the
figure 4-7.
(2) position the cable guide so that thicker part (N) comes
to the upper side as shown in the figure 4-8.
(3) Put the cable guide in the top cover, then place each
cable in the two ditches (0) of the PDP cover assembly
as shown in the figure 4-7.
«(»
(~) (K)
(U
FIGURE 4-7 Cable position
FIGURE 4-8 Cable Guide
4-8