Toshiba T3200 User Manual page 4

1.2.1 DIP switches
The system has DIP switches which are located at the rear panel.
The following table shows function of the DIP switches.
TABLE 1-1 DIP Switch Functions
DIP
Setting
Description
Switch
ON Auto-Switched display mode
1
OFF
IBM EGA full compatible
ON PRT port used both for input and output
2
OFF
PRT port only for output
ON
Communications port as CH2
3
OFF Communications port as CH 1
ON Double font in plasma for TEXT
4
OFF Single font in plasma for TEXT
ON Disable CRTC for EXT.CRTC
5
OFF Enable internal CRTC (normal)
ON North European Font to display
6
OFF Other Fonts (Normal)
7to 10 (Defined as follows)
Monitor in use
7 8 9
10
Monochrome OFF OFF OFF OFF
Standard RGB
(40 column mode is default)
ON OFF OFF ON
Standard RGB
(80 column mode is default)
OFF OFF OFF ON
Enhanced RGB
(200 line or emulation of standard RGB is
ON ON ON
OFF
default)
Enhanced RGB
(350 line, true enhanced operation is default)
OFF ON ON OFF
1-4