Toshiba T3200 User Manual page 106

4.3 REMOVING/REPLACING THE PDP MASK
1. Confirm that the POWER switch is off and unplug the ac cord.
2. Open the plasma display.
3. Using tweezers or fine-pointed instruments, peel off the
function label (A) and keep it in a clean place.
4. Remove the two screws (B) from the PDP mask (C), then remove
the PDP mask pulling it up.
([»)
(E)
FIGURE 4-4 Removing the PDP Mask
5. To install a new PDP mask, follow the above procedures in
reverse.
Note: Confirm that the eight latches (D) of the PDP cover
assembly (E) are inserted into the PDP mask.
4-5