Toshiba T3200 User Manual page 107

4.4 REMOVING/REPLACING THE PDP
1. Confirm that the POWER switch is off and unplug the ac cord.
2. Remove the PDP mask as directed in part 4.3.
3. Remove the four screws (A) on the PDP (B).
4. Lift up the PDP, then put it on the keyboard (C).
5. Disconnect the three cable (D) from the rear of the PDP.
FIGURE 4-5 Removing the PDP
6. To install a PDP, follow the above procedures in reverse.
4-6