Toshiba T3200 User Manual page 58

If you want to set the FDD and HDD retry count, type 88 then
press Enter. The following message will appear.
When don't operate, error retry count number is onece.
FOO
&
HOD Error retry count ?
You can set the error retry count of the floppy disk test
and hard disk test.
Type 99 then press Enter. Return to the DIAGNOSTICS MENU.
When select the FLOPPY DISK TEST, the following messages
will appear.
Test drive number select (1:F001.2:FOD2.0:F001&2) ?
Media in drivell mode (l:360k.2:360k-l.2M/720k.3:1.2M.4:720k) ?
Test start track (Enter:0/dd:OO-79)
?
In the case of type the test start track, test start track
number of the floppy disk is one digit or two digits.
When press Enter only, test start track number is zero
track.
When select the HARD DISK TEST, the following message will
appear.
Test drive number select (I:H001.2:H002.0:H001&2) ?
5. After pressing the test number (1 to 11) of the DIAGNOSTIC
TEST MENU, the following display (sample) will appear.
TEST NAME
SUB TEST
PASS COUNT
WRITE DATA
ADDRESS
xx
XXXXX
XX
XXX XX
SUB-TEST MENU :
01 - ROM CHECKSUM
ERROR COUNT
READ DATA
STATUS
99 - Exit to DIAGNOSTIC TEST MENU
SELECT SUB-TEST NUMBER?
TEST LOOP (1:YES/2:NO) ?
ERRR STOP (1:YES/2:NO) ?
3-3
XXXXXXX
XXXXX
XX
xxx