Toshiba T3200 User Manual page 85

3. Good track FORMAT
or Bad track FORMAT
Selection
(1) When Good track FORMAT or Bad track FO~ is selected,
the following message will appear.
Interleave number (3/1-9)
?
(2) Select an interleave number. (Usually select 3.) Type the
number and press Enter. The following message will
appear.
Drive number select (1:11, 2:12)
?
(3) Select a drive number. Type the drive number and press
Enter. The following message will appear.
[HOD TYPE]
[HOD TYPE]
[HOD TYPE]
CYLINDER
HEAD
SECTOR
=
XXX
=
X
=
XX
Press [Track Number
(CCCH)]
key?
(4) Type a track number (four digits) and press Enter.
(The first three digits are the cylinder number and the
last digit is the head number.) This executes the
formatting of good tracks or bad tracks.
Rote: This program can format only one track per operation. If
it is desired to format several good tracks or bad
tracks, repeat the operation as many times as nessary.
(5) After formatting the track of the hard disk, the Format
complete message will appear.
(6) Press the Enter to return to the HARD DISK FORMAT menu.
3-30