Toshiba T3200 User Manual page 91

3.20 RUNNING TEST
3.20.1 Program
descripti~n
This program automatically runs the following tests in sequence.
1. System test (subtest number 01)
2. Memory test (subtest number 01, 02, 03, 04, 06)
3. Display test (subtest number 01 to 08)
4. FDD test (subtest number 02)
S. Printer test (subtest number 03)
6. Async test (subtest number 01)
7. HDD test (subtest number 01, OS)
8. Real timer (subtest number 02)
When running an FDD test, this system automatically decides
whether there are one or two FDDs.
3.20.2 Operations
CAUTION:
Do not forget to load a work disk. If a work disk is
not loaded, an error will be generated during FDD
testing.
1. Remove the diagnostics disk and insert the work disk into
the floppy disk drive.
2. After pressing 6 and Enter to select from the DIAGNOSTIC
MENU, the following message will appear.
Printer wrap around test (YIN) 1
3. Select whether to execute the printer wraparound test (Yes)
or not (No). Type the desired Y or
N
and press Enter key.
(If Y is selected, a wraparound connector must be connected
to the pr inter connector on the back of the unit.) The
following message will appear.
4.
Async wrap around test (YIN) 1
Select whether to execute the test (Yes)
the desired Y or N and press Enter Key.
an RS232C wraparound connector must be
COMMS connector on the back of the unit.)
or not (No). Type
(If Y is selected,
connected to the
5. This program is repeated continuously. To stop the program,
press Ctrl + Break key.
3-36