Perkins New 1000 Series Workshop Manual page 159

6
New 1000 Series
8 Fit the camshaft gear, see Operation 6-12 and the idler gear, see Operation 6-7. Ensure that all the timing
marks are correctly aligned.
9 Fit the fuel injection pump and the drive gear:
l For Bosch fuel injection pumps, see Operation 11-11
l For Lucas/Delphi DP200 Series fuel injection pumps, see Operation 11-14
l For Stanadyne fuel injection pumps, see Operation 11-18.
10 Eliminate air from the fuel system, see Operation 11-20.
11 Fit the compressor, see Operation 15-2, and its drive assembly, if fitted, see Operation 15-15.
12 Fit the timing case cover, see Operation 6-2.
13 Fit the coolant pump. Gear driven pumps only, see Operation 12-4 or Operation 12-10.
14 Fit the crankshaft pulley, see Operation 5-1 or Operation 5-3.
15 If necessary, fit the fan drive pulley, see Operation 12-20.
16 Fit the alternator, see Operation 14-4 and the alternator front bracket.
17 Fit the drive belts, see Operation 14-3 and adjust the belt tension, see Operation 14-2.
18 Fit the fan, see Operation 10-12.
19 Fill the cooling system.
Workshop Manual, TPD 1350E, Issue 4 145
This document has been printed from SPI². Not for Resale