General Information; Introduction - Perkins New 1000 Series Workshop Manual

New 1000 Series
1

General information

1

Introduction

This Workshop Manual has been written to provide assistance in the service and overhaul of Perkins New
1000 Series engines. For overhaul procedures the assumption is made that the engine is removed from the
application. The engine conforms with USA (EPA/CARB) stage 1 and EEC stage 1 emissions legislation for
agricultural and industrial applications.
Most of the general information which is included in the relevant User's Handbook has not been repeated in
this workshop manual and the two publications should be used together.
Where the information applies only to certain engine types, this is indicated in the text.
The details of some operations will be different according to the type of fuel injection pump which is fitted. The
specific pump type used can be found by reference to the manufacturer's identification plate on the pump body.
Generally, the type of pump fitted is as shown below.
l Lucas/Delphi - DP200 Series
l Bosch - EPVE
l Stanadyne - DB4.
When reference is made to the "left" or "right" side of the engine, this is as seen from the flywheel end of the
engine.
Special tools have been made available, for a list of these, see Chapter 16, Special tools. Reference to the
relevant special tools is also made at the beginning of each operation, where relevant.
POWERPART recommended consumable products are listed on page 8. Reference to the relevant
consumable products is also made at the beginning of each operation, where relevant.
Data and dimensions are included in Chapter 2, Specifications.
Read and remember the "Safety precautions" on page 5. They are given for your protection and must be used
at all times.
Danger is indicated in the text by two methods:
Warning! This indicates that there is a possible danger to the person.
Caution: This indicates that there is a possible danger to the engine.
Note: Is used where the information is important, but there is not a danger.
Workshop Manual, TPD 1350E, Issue 4 1
This document has been printed from SPI². Not for Resale