Operation 7-7 To Fit A Service Liner - Perkins New 1000 Series Workshop Manual

7
To fit a service liner
Special requirements
Special tools
Description
Remover/replacer for cylinder liner
(main tool)
Adaptors for use with 21825543
Gauge for cylinder liner flange
Dial gauge for use with 21825496
A service liner is a transition fit of +/- 0,03 mm (+/- 0.001 in) in the parent bore. A special tool will not be
necessary to fit some liners, but where a liner is a tight fit, tool 21825543 can be used.
Caution: Do not hit a liner with a hammer.
1 Clean thoroughly the parent bore. Clean the top 50 mm (2.0 in) and the recess for the liner flange with
POWERPART Safety cleaner; use it in accordance with the manufacturer's instructions.
2 Clean thoroughly the outer surface of the liner with POWERPART Safety cleaner.
3 Lubricate lightly the parent bore with clean engine lubricating oil, except for the top 50 mm (2.0 in).
5
6
A
158
This document has been printed from SPI². Not for Resale
Part number
21825543 POWERPART Retainer (oil tolerant)
21825563 POWERPART Safety cleaner
21825496
21825617
1
2
3
4
A0213
New 1000 Series
Operation 7-7
Consumable products:
Description
Workshop Manual, TPD 1350E, Issue 4
Part number
21820603
21820128
Continued