Timing Case Cover - Perkins New 1000 Series Workshop Manual

6

Timing case cover

To remove
1 Remove the fan, see Operation 12-19.
2 Remove the alternator, see Operation 14-4.
3 Remove the crankshaft pulley, see Operation 5-1 or Operation 5-2.
4 Drain the coolant and remove the coolant pump. Gear driven pumps only, see Operation 12-4 or Operation
12-9.
5 Release the setscrews and nuts of the cover (A5) and remove the cover, from the timing case assembly (A2).
6 Discard the joint (A4).
1
5
4
A
124
This document has been printed from SPI². Not for Resale
2
3
A0375
New 1000 Series
Operation 6-1
Workshop Manual, TPD 1350E, Issue 4