Engine Lift Equipment - Perkins New 1000 Series Workshop Manual

New 1000 Series

Engine lift equipment

The maximum weight of the engine without coolant, lubricant or a gearbox fitted will vary for different
applications. It is recommended that lift equipment of the minimum capacity listed below is used:
Four cylinder engines
Six cylinder engines
Before the engine is lifted:
l Always use lift equipment of the approved type and of the correct capacity to lift the engine. It is
recommended that lift equipment of the type shown in (A) is used, to provide a vertical lift directly above
the engine lift brackets (A1). Never use a single lift bracket to raise an engine
l Check the engine lift brackets for damage and that they are secure before the engine is lifted. The torque
for the setscrews for the engine lift brackets is 44 Nm (33 lbf ft) 4,5 kgf m
l To prevent damage to the rocker cover, ensure that there is clearance between the hooks and the rocker
cover
l Use lift equipment or obtain assistance to lift heavy engine components such as the cylinder block, cylinder
head, balancer unit, flywheel housing, crankshaft and flywheel.
A
Workshop Manual, TPD 1350E, Issue 4
This document has been printed from SPI². Not for Resale
500 kg (1100 lbs)
600 kg (1320 lbs)
1
A0044
1
7