Timing Case And Drive Assembly; Fuel Injection Pump - Perkins 100 Series Workshop Manual

100 Series
6

Timing case and drive assembly

6

Fuel injection pump

To remove and to fit Operation 6-1
Special requirements
Torque Nm (lbf ft) kgf m
Solenoid 17 (12) 1,7
When the shim (A1) is not required, assemble using a 0,5 mm bead of silicone sealant.
Note: Blank off the connections of the fuel injection pump until assembly.
1
Workshop Manual, TPD 1377E, issue 4 65
This document has been printed from SPI². Not for Resale