Utility-File Transfer Pbx (Sd Card) To Pc - Panasonic KX-TDA100 Pc Programming Manual

2.6.3 Utility—File Transfer PBX (SD Card) to PC
Copies system data files from the SD memory card installed in the PBX to the connected PC.
This option is only available at Installer level.
The files that can be downloaded from the SD memory card are as follows:
File Name
DSSYS (KX-TDA30)
DSYS (KX-TDA100/KX-TDA200)
DLSYS (KX-TDA600)
$SYSERR
$SYSERR1–$SYSERR9
DSKEYSD (KX-TDA30)
DKEYSD (KX-TDA100/KX-TDA200)
DLKEYSD (KX-TDA600)
Downloading the DSYS/DSSYS/DLSYS system data file allows you to make a backup of the
configuration of the PBX.
The error data files are snapshots of the configuration of the PBX taken automatically when a major
error causes a system reset. They can be analysed by your dealer to identify the source of a problem.
If there is only one error data file, its name will be $SYSERR. If there is more than one file, the files
will be numbered in chronological order, up to a maximum of 9 files.
To transfer files to the PC
1.
From the Utility menu, select File Transfer PBX (SD Card) to PC.
2.
Select the file to download from the list of files on the SD memory card.
Only the files listed in the table above can be downloaded. Selecting any other file will cause an
error message to be displayed.
3.
Click Transfer.
The Save dialogue box will be displayed.
4.
Navigate to the folder in which you want to save the file.
5.
Enter a file name.
6.
Click Save.
A window showing the download progress will be displayed.
A message will be displayed when the transfer is complete.
7.
Click OK.
File Type
System Data
Error Data
Feature Restriction
PC Programming Manual
2.6 Utility
75