Slot [1-1] Ip-Gw Card Property - Panasonic KX-TDA50 Features Manual

Default
80 ms
Value Range
None, 80 × n (n=1–15) ms
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
Caller ID—Caller ID (FSK) Detection Timer
Specifies the total time required by the PBX to detect Caller ID information. To enable this setting, Caller ID
Signaling on this screen should be assigned to FSK.
Default
2000 ms
Value Range
80 × n (n=13–50) ms
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
4.7.5

Slot [1-1] IP-GW Card Property

The properties of the VoIP Gateway card can be specified.
En-bloc Dialing setting
Selects the call dialing mode.
Default
Overlap
Value Range
Overlap: The PBX sends dialed digits one by one.
En-bloc: The PBX sends all of dialed digits at once after the extension user completes dialing. The PBX
recognizes end of dialing at the time when 1) dialing #, if programmed; 2) dialing a preprogrammed
telephone number, or 3) the inter-digit timer expires.
4.7 Configuration [1]
Feature Guide 329