Changing An Option On A Device's Shortcut Menu - Brocade Communications Systems WFT-2D User Manual

10

Changing an option on a device's shortcut menu

10. Click Add to add the new menu item.
11. Click OK to save your work and close the Setup Tools dialog box.
Changing an option on a device's shortcut menu
You can change the parameters for a tool that displays on a device's shortcut menu.
To edit an option to the device's shortcut menu, complete the following steps.
1. Select Tools > Setup.
2. Click the Product Menu tab.
3. Select the menu item you want to change in the Product Popup Menu Items table.
4. Edit or select the text in the Menu Text list as you want it to appear on the menu.
5. Choose one of the following options:
6. Change the type in the Condition 1 Property name list.
7.
8. (Optional) Change the Condition 2 Property type or edit the Value for that property type
9. Select the tool from the Tool list that you want to launch, or click Define to add a tool.
10. Select the Append device ID check box to specify the parameter used when opening the tool.
422
It displays in the Product Popup Menu Items table.
NOTE
You must click Add before clicking OK; otherwise, your changes will be lost.
The Setup Tools dialog box displays.
The Product Popup Menu Items table displays all configured shortcut menu options.
The settings for the selected menu item display in the fields at the top of the dialog box.
-
To display the menu option only for devices that meet the conditions listed, select the
Match Conditions option.
-
To display the menu option on the shortcut menus for all devices, select the All option.
If you select All, skip to
Change the value for the selected property in the Condition 1 Value field.
(Condition 1 AND Condition 2 must be true) to edit a second condition to be simultaneously
true.
NOTE
To set up a condition where Condition 1 OR Condition 2 must be true, define two menu items,
one for each condition.
To specify a new tool, refer to
-
To specify that the device's IP address should be used when opening the tool, select the IP
Address option.
-
To specify that the device's Node WWN should be used when opening the tool, select the
Node WWN option.
step 8. Otherwise, continue to
"Adding a tool" on page 417.
step 5.
Brocade Network Advisor SAN User Manual
53-1003154-01