Brocade Communications Systems WFT-2D User Manual page 1278

30
Creating a custom frame monitor
2. Select the Switch option.
3. Enter the monitor data in the Configure Monitor area.
4. Select one or more switches in the Products / Monitors list, and click the right arrow button to
5. Select the Port option.
6. Expand the switch in the Products / Ports list.
7.
8. Select one or more frame monitors in the Monitors list.
9. Click the right arrow button to move the frame monitor to the selected ports.
10. Click OK.
1226
The Products / Monitors list displays the switches that support Frame Monitoring.
assign the frame monitor to those switches.
The Monitors list displays all of the frame monitors defined for that switch.
Select one or more ports.
You must select only ports belonging to the same switch.
The Monitor Details list displays the monitors that are assigned to a selected port. If no
monitors are assigned, or if more than one port is selected, the Monitor Details list does not
display.
The Frame Monitor Configuration Status dialog box displays
FIGURE 528
Frame Monitor Configuration Status dialog box
(Figure 528).
Brocade Network Advisor SAN User Manual
53-1003154-01