Displaying The Client Authentication Audit Trail; Radius Server Configuration - Brocade Communications Systems WFT-2D User Manual

Displaying the client authentication audit trail

All responses to authentication requests coming from clients are logged to an audit trail log file.
This file is automatically backed up on the first day of every month.
1. Select the AAA Settings tab.
2. Click Display next to Authentication Audit Trail.
3. Enter your username and password in the appropriate fields and click OK.
4. Click the Client to Server Authentication tab to view the client to server authentication status.
5. Click the Authentication Settings Changes tab to view the previous authentication changes.

Radius server configuration

NOTE
You must configure an Radius server as the primary authentication server (refer to
Radius server authentication"
Depending on the Radius server you install, the configuration and dictionary files may have a
different name than in the following procedures. If you are using a Radius server for authentication,
complete the following procedures on the Radius server:
1.
2.
3.
Configuring Management application data on the Radius server
The client configuration file contains the IP address, secret, and localhost name for the
Management application server.
1. Open the client configuration file (such as clients.conf) a text editor (such as Notepad).
2. Enter the Management server data as follows:
Brocade Network Advisor SAN User Manual
53-1003154-01
The Login dialog box displays.
The defaults are Administrator and password, respectively.
The Authentication Audit Trail log displays.
The audit trail shows user names that have attempted to log in to the Management application,
and changes to user authentication.
"Configuring Management application data on the Radius server"
"Configuring user authorization for the Radius server"
"Configuring the dictionary file for the Radius server"
client ip_address{
secret = user-defined_secret
shortname = localhost_name
}
on page 432).
Radius server configuration
"Configuring
on page 445.
on page 446
on page 446
11
445