Brocade Communications Systems WFT-2D User Manual page 1094

25
Port groups
2. Click New.
3. Enter a name for the port group in the Name field.
4. Enter a description for the port group in the Description field.
5. Select one or more ports to add to the group in the Group Type - FC Ports list.
6. Click the right arrow button.
7.
8. Click OK to close the Port Groups dialog box.
1042
FIGURE 472
Port Groups dialog box
A port group must have at least one port in the Membership List. All ports must be from
switches in the same fabric.
The selected ports display in the Membership List.
Click Update.
The new port group displays in the Port Groups list.
Brocade Network Advisor SAN User Manual
53-1003154-01