20
Adding target tape LUNs for encryption
FIGURE 384
3. Select a target tape storage device from the Encryption Targets table, then click LUNs.
FIGURE 385
4. Click Add.
830
Encryption Targets dialog box
The Encryption Target Tape LUNs dialog box displays. (Refer to
Encryption Target Tape LUNs dialog box
The Add Encryption Target Tape LUNs dialog box displays. (Refer to
LUNs in the storage device that are visible to hosts is displayed. LUNs are identified by the Host
world wide name, LUN number, Volume Label Prefix number, and Enable Write Early ACK and
Enable Read Ahead status. The LUN numbers may be different for different hosts.
Figure
385.)
Figure
386.) A table of all
Brocade Network Advisor SAN User Manual
53-1003154-01