Inheriting Alert Parameters From A Switch; Displaying Bottleneck Statistics - Brocade Communications Systems WFT-2D User Manual

10. Click OK or Apply to save your changes.

Inheriting alert parameters from a switch

When you enable bottleneck detection on a switch, all eligible ports on that switch inherit the same
bottleneck parameters as the switch. You can then change the parameters for specific ports or
exclude specific ports from bottleneck detection.
Use the following procedure if you want to restore the switch bottleneck parameters to a port that
has direct assigned settings.
1. Select Monitor > Performance > Bottlenecks.
2. Select a port that has directly assigned bottleneck settings, which is indicated by a right arrow
3. Click Inherit From Switch.
4. Select the Alerts check box to enable alerts. Clear this check box to disable alerts.
5. Click OK or Apply to save your changes.
Copying alert parameters from one switch or port to another
1. Select Monitor > Performance > Bottlenecks.
2. Select the switch or port from which you want to copy the bottleneck parameters.
3. Click the left arrow.
4. Select one or more switches, ports, or fabrics to which you want to copy the bottleneck
5. Click the right arrow.
6. Click OK or Apply to save your changes.

Displaying bottleneck statistics

You can display a graph of bottleneck statistics for up to 32 ports at one time.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Bottlenecks dialog box displays.
in the Direct Assigned column.
The bottleneck parameters that are specified for the switch are applied to the port.
The Bottlenecks dialog box displays.
The parameters display in the Bottleneck Detection pane.
parameters.
You can select fabrics or switches or ports, but you cannot select a mix of fabrics, switches,
and ports.
The bottleneck parameters are applied to the selected items.
Bottleneck detection
28
1105