Brocade Communications Systems WFT-2D User Manual page 1198

29
Flow Monitor
3. Select the Expand All check box to expand the Group/Product tree to show supported device
4. Select a device port in the Available Device Ports list and click the right arrow to move to the
5. Click OK on the Select Device Port dialog box.
Selecting an ingress or egress port from a list of available switch ports
To select the ingress or egress port for the switch, complete the following steps.
1. Click the ellipses button to the right of the Ingress or Egress field.
2. Select the Expand All check box to expand the Group/Product tree to show supported switch
3. Select a switch port in the Available Switch Ports list and click the right arrow to move to the
4. Click OK on the Select Switch Port dialog box.
1146
ports for all discovered devices.
Selected Device Ports list.
Select the Use Any Port (*) option to use any supported device port. If you already selected a
device port, selecting this option clears the selection.
Note that moving a device port to the Selected Device Ports list automatically selects the Use
Selected Port option.
Move the device port back to the Available Device Ports list by clicking the left arrow.
The selected device port displays in the Source or Destination field.
The Select Switch Port dialog box displays expanded to display all supported device ports for
the target switch in the Available Switch Ports list.
Unsupported ports do not display in the Available Switch Ports list.
ports for all discovered devices.
Selected Switch Ports list.
Move the switch port back to the Available Switch Ports list by clicking the left arrow.
The selected switch port displays in the Ingress or Egress field. Note that the Target Switch
field updates dynamically based on the ingress port selection.
Brocade Network Advisor SAN User Manual
53-1003154-01