Brocade Communications Systems WFT-2D User Manual page 891

FIGURE 393
3. Select Tape as the container of type for which to display or clear statistics, then click Statistics.
FIGURE 394
Brocade Network Advisor SAN User Manual
53-1003154-01
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays. (Refer to
CryptoTarget containers is displayed.
Encryption Targets dialog box
The Tape LUN Statistics dialog box displays. (Refer to
that are members of the selected tape container are displayed.
Tape LUN Statistics dialog box
The dialog box contains the following information:
•
LUN #: The number of the logical unit for which statics are displayed.
•
Tape Volume/Pool: The tape volume label of the currently-mounted tape, if a tape session
is currently in progress.
•
Tape Session #: The number of the ongoing tape session.
•
Uncompressed blocks: The number of uncompressed blocks written to tape.
•
Compressed blocks: The number of compressed blocks written to tape.
Tape LUN statistics
Figure 393.) A list of configured
Figure 394.) The statistics for all LUNs
20
839