Host Port Mapping Overview - Brocade Communications Systems WFT-2D User Manual

San user manual
Table of Contents

Advertisement

Host Port Mapping
In this chapter

Host port mapping overview

Host Bus Adapters (HBAs) and Hosts discovered through a fabric can be easily identified in the
topology by their product icons. For a list of products and their icons, refer to
page 363. Once identified in the topology, you can create Hosts and assign the HBAs to them and
import an externally created Host port mapping file (.CSV) to the Management application.
NOTE
The Management application enables you to map HBAs from multiple fabrics (previous versions
limited HBA mapping to one fabric).
NOTE
Converged Network Adapters (CNAs) and HBAs support Host port mapping.
NOTE
After Auto Enclosure, if you discover a host that has more or as many adapters as the Auto
Enclosure, Host discovery succeeds.
The Management application also enables you to discover Hosts directly using Host discovery (for
step-by-step instructions, refer to
when you open the Host Port Mapping dialog box, the Management application automatically
groups all HBAs under the discovered Host.
If you create a new Host and associate HBAs to it, and then try to discover a Host with the same
HBAs using Host discovery, the HBAs discovered using Host discovery must match the HBAs
associated to the Host exactly; otherwise, Host discovery will fail.
Brocade Network Advisor SAN User Manual
53-1003154-01
Host port mapping overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 553
Creating a new Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 554
Renaming an HBA Host. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
Deleting an HBA Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
Viewing Host properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
Associating an HBA with a Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 556
Importing HBA-to-Host mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 556
Removing an HBA from a Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 558
Exporting Host port mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 558
"Host discovery"
on page 55). If you discover a Host directly,
Chapter
13
"Icon legend"
on
553

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents