Deleting A Report Definition; Event Custom Report Schedules - Brocade Communications Systems WFT-2D User Manual

32

Event custom report schedules

3. When the Add/Edit Report Definition dialog box displays, modify the definition. (Refer to
4. When you have finished, perform one of the following tasks:

Deleting a report definition

You can delete a report definition, but only if it belongs to you.
To delete a report definition, complete the following steps.
1. To access the dialog box, select Reports > Event Custom Reports.
2. Click the Report Definitions tab of the Event Custom Reports dialog box and select the
3. Click the Delete button.
4. Click Yes to delete the definition or No to cancel your request.
Event custom report schedules
Click the Schedules tab, shown in
definitions that have been scheduled to automatically run at a specified date and time.
FIGURE 570
1314
"Filtering a report definition"
•
If you own this definition, the OK button is available. Click OK to save your changes.
•
Click Run to generate the report.
•
Click Cancel to discard your changes and exit the Report Definitions tab of the Event
Custom Reports dialog box.
The Event Custom Reports dialog box displays.
definition you want to delete.
A message displays, prompting you to confirm the deletion.
Schedules tab of the Event Custom Reports dialog box
on page 1309.)
Figure 570, to display its contents. The Schedules list shows the
Brocade Network Advisor SAN User Manual
53-1003154-01