Viewing Fcip Tunnel Performance - Brocade Communications Systems WFT-2D User Manual

San user manual
Table of Contents

Advertisement

7.
8. Click Cancel on the IP Traceroute dialog box.

Viewing FCIP tunnel performance

NOTE
IP Performance is only supported on the 4 Gbps Router, Extension Switch and Encryption Blade
running Fabric OS 5.2 or later.
NOTE
If you run IP Performance over a link also being used for production traffic, it will impact the
production traffic performance.
To view FCIP tunnel performance, complete the following steps.
1. Select Monitor > Troubleshooting > FCIP > Performance.
2. Select a switch from the Available Switches table.
3. Select a port from the GigE Port list.
4. Select an IP address from the IP Interface list.
5. Enter the remote IP address in the Remote IP Address field.
6. Click OK.
Brocade Network Advisor SAN User Manual
53-1003154-01
TABLE 83
IP Trace Details
Field or Component
Description
Hop Number
The TTL inserted in the transmitted probe packet.
IP Address 1
The IP address of the system that responded to the first of the three probes, or
0.0.0.0 if there was no response.
IP Address 2
The IP address of the system that responded to the second of the three probes, or
0.0.0.0 if there was no response.
IP Address 3
The IP address of the system that responded to the third of the three probes, or
0.0.0.0 if there was no response.
RTT 1
The time in milliseconds for the first of the three responses to be received, or blank
if there was no response. This value helps identify a congested or slow link in the
path.
RTT 2
the time in milliseconds for the second of the three responses to be received, or
blank if there was no response. This value helps identify a congested or slow link in
the path.
RTT 3
the time in milliseconds for the third of the three responses to be received, or
blank if there was no response. This value helps identify a congested or slow link in
the path.
Click Close on the IP Traceroute Result dialog box.
The IP Performance dialog box displays.
The IP Performance Result dialog box displays.
FCIP troubleshooting
27
1065

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents