Saving A Security Configuration Deployment - Brocade Communications Systems WFT-2D User Manual

17
Security configuration deployment

Saving a security configuration deployment

To save a security configuration deployment, complete the following steps.
FIGURE 258
1. Select the Save deployment only option to save the deployment definition for future
2. Select one of the following save configuration options:
3. Enter a name for the deployment in the Name field.
4. Enter a description for the deployment in the Description field.
5. Select one or more ports or products to which you want to deploy the configuration in the
6. Click OK on the Deploy to Products - Layer 2 ACL dialog box.
664
Deploy to Product/Ports dialog box
deployment.
•
Save to running — Select to update the running configuration; however, the deployment is
not saved to the product's flash memory.
•
Save to running and startup — Select to update the running configuration as well as save
the deployment configuration to the product's flash memory. Selecting this option is the
equivalent to a write memory command on the product CLI.
•
Save to running and startup then reboot — Select to update the running configuration,
save the deployment configuration to the product's flash memory, and reboot the product.
Selecting this option is the equivalent to entering a write memory and a reload command
on the product CLI.
Available Targets list and click the right arrow button to move them to the Selected Targets list.
Brocade Network Advisor SAN User Manual
53-1003154-01