Configuring Qos Priorities - Brocade Communications Systems WFT-2D User Manual

FIGURE 427

Configuring QoS Priorities

For 8 Gbps platforms only, you can change QoS priorities from the default settings using the
following steps:
1. Select Configure > FCIP Tunnels.
2. Select the switch you want to configure under Products.
3. Click the Add button, or right-click on the switch and select Add Tunnel.
Brocade Network Advisor SAN User Manual
53-1003154-01
External User Perspective
VE Port
Tunnel
Circuit
IP
Interface
GE Port
TCP connections for handling QoS SID/DID-based FC traffic prioritization
The FCIP Tunnels dialog box is displayed. All discovered fabrics with Extension Switches are
listed under devices, and all existing FCIP tunnels are displayed.
The Add FCIP Tunnel dialog box is displayed.
QoS SID/DID priorities over an FCIP trunk
Internal Architecture
High Priority Med. Priority
Virtual Virtual
Tunnel Tunnel
Virtual Virtual
Circuit Circuit
TCP TCP
Connection Connection
Low Priority F-Class
Virtual Virtual
Tunnel Tunnel
Virtual Virtual
Circuit Circuit
TCP TCP
Connection Connection
22
943