Brocade Communications Systems WFT-2D User Manual page 1255

3. Clear the Monitor check box.
4. Select the Mirror check box.
5. Select the Local Flow Mirror option. By default, CPU Mirroring is enabled.
6. Select the Persist over switch reboots check box to persist this flow definition over reboots.
7.
8. Enter the source device (H1) in the Source field.
9. Enter an asterisk (*) in the Destination field.
10. Enter the mirror port number in the Mirror field or click the ellipsis button to select a port from
11. Enter the frame type (scsismd) in the Frame Type field.
12. Click OK to save the flow definition.
Brocade Network Advisor SAN User Manual
53-1003154-01
Select the Activate all selected features check box to immediately activate the flow after
creation.
the list.
Only supported on 16 Gbps-capable ports on devices running Fabric OS 7.3 or later.
To select a port from a list, refer to
page 1148".
To select a frame type from a list, click the ellipsis button. Refer to
parameters" on page 1129" for a list of the supported frame type parameters.
When the flow definition activates, the Flow Vision dialog box displays with the new flow
selected (highlighted) in the Flow Definitions table. To review the sub-flow data for the selected
flow, refer to "Monitoring a Flow Mirror flow"
"Selecting a mirror port from a list of available ports"
on page 1194".
29
Flow Mirror
on
"Flow frame type
1203