Copying An Allow/Prohibit Matrix Configuration - Brocade Communications Systems WFT-2D User Manual

Copying an Allow/Prohibit Matrix configuration

To duplicate an existing Allow/Prohibit Matrix configuration, complete the following steps.
1. Select Configure > Allow/Prohibit Matrix.
2. Select the Allow/Prohibit Matrix configuration you want to copy.
3. Click Duplicate.
4. Enter a name for the configuration.
5. Enter a description for the configuration.
6. Select the check box for the switch to which you want to save the configuration in the Selected
7.
Brocade Network Advisor SAN User Manual
53-1003154-01
Saving or copying Allow/Prohibit Matrix configurations to another device
The Configure Allow/Prohibit Matrix dialog box displays.
You can do this by expanding the view for the switch under Available Switches and selecting a
configuration, or you can select the matrix under Allow/Prohibit Matrix.
The Save As/Duplicate dialog box displays, as shown in
FIGURE 468
Save As/Duplicate dialog box
Switch list.
Click OK.
A message displays stating that the outstanding port configuration is discarded when copying
a configuration from the switch with more ports to a switch with fewer ports and vice versa.
Click OK to close the message.
The copied configuration displays in the Available Switches list under the selected switch. To
edit this configuration, refer to
"Configuring an Allow/Prohibit Matrix manually"
Figure 468
"Configuring an Allow/Prohibit Matrix"
on page 1027.
25
on page 1029.
on page 1025 or
1029