Adding A Configuration Policy Manager - Brocade Communications Systems WFT-2D User Manual

31

Adding a configuration policy manager

5. To delete the selected configuration policy manager, click Delete (refer to
6. To run the selected policy and view the report, click Run (refer to
7.
8. To view the report history for all configuration policy managers, click History (refer to
9. To view the report history for a selected configuration policy manager, select a configuration
10. Click Close on the Configuration Policy Manager dialog box.
Adding a configuration policy manager
To add a configuration policy manager, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
2. Click Add.
1240
configuration policy manager"
policy manager" on page 1248).
To open the last executed report for a selected configuration policy manager, select a
configuration policy manager and click Report (refer to
manager report" on page 1249).
historical reports for a configuration policy manager"
policy manager and click History (refer to
manager" on page 1253).
The Configuration Policy Manager dialog box displays.
The Add Configuration Policy Manager dialog box displays
on page 1248).
"Viewing a configuration policy
on page 1253).
"Viewing historical reports for a configuration policy
"Deleting a
"Running a configuration
(Figure 530).
Brocade Network Advisor SAN User Manual
53-1003154-01
"Viewing