Reverting To The Default Background Color - Brocade Communications Systems WFT-2D User Manual

3. Select a color from the swatches tab and click OK.
4. Select the Set as Default Color check box.
5. Click OK to change the background color on the topology.
6. Click OK on the Map Display Properties dialog box.

Reverting to the default background color

To revert back to the default background color, complete the following steps.
1. Right-click a group and select Map Display.
2. Select the Default option.
3. Click OK on the Map Display Properties dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 167
Choose a background color dialog box
•
To specify a color based on hue, saturation, and value, click the HSV tab. Specify the hue
(0 to 359 degrees), saturation (0 to 100%), value (0 to 100%), and transparency (0 to
100%).
•
To specify a color based on hue, saturation, and lightness, click the HSL tab. Specify the
hue (0 to 360 degrees), saturation (0 to 100%), lightness (0 to 100%), and transparency (0
to 100%).
•
To specify a color based on values of red, green, and blue, click the RGB tab. Specify the
values for red (0 to 255), green (0 to 255), blue (0 to 255), and alpha (0 to 255) or enter a
color code in the Color Code field.
•
To specify a color based on values of cyan, magenta, yellow, and black, click the CMYK tab.
Specify the values for cyan (0 to 255), magenta (0 to 255), yellow (0 to 255), black (0 to
255), and alpha (0 to 255).
The Map Display Properties dialog box displays.
SAN topology layout
8
385