Keeping A Copy Past The Defined Age Limit; Tracking Changes From The Baseline Configuration - Brocade Communications Systems WFT-2D User Manual

12
Configuration file management

Keeping a copy past the defined age limit

NOTE
This feature requires a Trial or Licensed version.
1. Select Configure > Configuration File > Configuration File Manager.
2. Select the check box under Keep for the configuration you want to preserve.
3. Click Apply to save changes.

Tracking changes from the baseline configuration

Use change tracking to compare the latest backup configuration file with the configuration that is
designated as the baseline.
NOTE
Change Tracking tab is not displayed for imported, unmanaged, or unmonitored switches.
1. Click the SAN tab.
2. Select Configure > Configuration File > Configuration File Manager.
3. Click the Change Tracking tab.
490
The Configuration File Manager dialog box displays.
The configuration will be kept until it is manually deleted, or until the Keep check box is cleared
to enable the age limit again. The file marked as Baseline will be marked as Keep.
The Configuration File Manager dialog box displays.
The Change Tracking tab of the Configuration File Manager dialog box displays, as shown in
Figure 202 on page 491
Brocade Network Advisor SAN User Manual
53-1003154-01