FIGURE 408
Viewing and editing switch encryption properties
To view switch encryption properties, complete the following steps:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a switch or encryption engine from the Encryption Center Devices table, then select
Brocade Network Advisor SAN User Manual
53-1003154-01
Encryption Targets Disk LUNs dialog box - Time left for auto rekey
dialog box. (Refer to
Figure 266
Switch/Engine > Properties from the menu task bar, or right-click a switch or encryption engine
and select Properties.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Properties icon.
The Encryption Switch Properties dialog box displays. (Refer to
Viewing and editing switch encryption properties
on page 694.)
Figure
409.)
20
863