Brocade Communications Systems WFT-2D User Manual page 491

3. Add or edit a TACACS+ server by referring to
4. Rearrange the TACACS+ servers in the table by selecting a server and click the Up or Down
5. Delete a TACACS+ server by selecting the server and click Delete.
6. Test the established active connection with the TACACS+ server by clicking Test.
7.
8. Set secondary authentication by selecting one of the following options from the Secondary
9. Set the fall back condition to secondary authentication by selecting one of the following
10. Set the authorization preference by selecting one of the following options from the
11. Click Apply to save the configuration.
12. Click Close to close the Server Management Console.
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 181
AAA Settings tab - TACACS+ server
button to move it.
The Test Authentication dialog box displays.
Enter your user ID and password and click Test.
Test verifies your user ID and password for the local database and verifies user privileges on
the Management application server.
Authentication list:
•
Local Database
•
None
options from the Fail Over Option list:
•
TACACS+ Server Not Reachable
•
TACACS+ Server Authentication Failed
Authorization Preference list:
•
Local Database
•
Primary Authentication Server
To display the authentication audit trail, refer to
trail" on page 445.
Confirm authentication and authorization by logging into the Management application server
(refer to "Logging into a server from the server machine"
AAA Settings tab
"Configuring a TACACS+ server"
"Displaying the client authentication audit
on page 3).
11
on page 440.
439