E_Port Commissioning - Brocade Communications Systems WFT-2D User Manual

San user manual
Table of Contents

Advertisement

12
Port commissioning

E_Port commissioning

Although you can use any of the following methods to access the E_Port commissioning
commands, individual procedures only include one method.
Decommissioning an E_Port
NOTE
You must enable Lossless DLS on both the source and destination switches before you
decommission an E_Port.
NOTE
Fabric tracking must be enabled (refer to
decommissioned port details (such as port type, device port WWN, and so on). Do not accept
changes in the Management application client.
Select the E_Port in the Product List, and then select Configure > Port Commissioning >
Decommission > Port.
While decommissioning is in progress, a down arrow icon displays next to the port icon in the
Product List. You can view the port commissioning results in the deployment reports (refer to
"Viewing a port commissioning deployment report"
When the decommission is complete, an application event displays in the Master Log detailing
success or failure.
Recommissioning an E_Port
NOTE
You do not need to enable Lossless DLS before you recommission an E_Port.
Select the E_Port in the Product List, and then select Configure > Port Commissioning >
Recommission > Port.
While recommissioning is in progress, an up arrow icon displays next to the port icon in the Product
List. You can view the port commissioning results in the deployment reports (refer to
port commissioning deployment report"
When the recommission is complete, an application event displays in the Master Log detailing
success or failure.
534
From the main menu, select the E_Port in the Product List, and then select Configure > Port
Commissioning > Decommission/Recommission > Port.
From the Product List, right-click the E_Port and select Decommission/Recommission > Port.
From a Dashboard widget, right-click the E_Port and select Decommission/Recommission >
Port.
"Enabling fabric tracking"
on page 539).
on page 539).
Brocade Network Advisor SAN User Manual
on page 133) to maintain the
"Viewing a
53-1003154-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents