The Escalation Policy - Brocade Communications Systems WFT-2D User Manual

Creating an event action with a pseudo event on the escalation policy
To create an event action with a pseudo event on the escalation policy, complete the following
steps.
1. Select Monitor > Event Processing > Event Actions.
2. Click Add to display the Identification pane of the Add Event Action dialog box.
3. Enter a name and description for the event action and select the Enabled check box to enable
4. Click Next to display the Events pane.
5. Select the Pseudo Events event type from the Show list.
6. Select the pseudo event you created and click Next.
7.
8. Click Next to advance to the Policy pane of the Add Event Action dialog box.
9. Click the Take actions for the selected events when they occur button if you want to take action
10. Click Next to advance to the Action Group-Actions pane of the Add Event Action dialog box.
11. Select the Alert by E-mail check box. An e-mail notification will be sent to the designated e-mail
12. Click Next to display the Action Group - E-mail Settings pane of the Add Event Action dialog box.
13. Select the Management application user to whom the e-mail message will be sent from the
Brocade Network Advisor SAN User Manual
53-1003154-01
•
"Creating an event action definition"
•
"Creating a new event action definition by copying an existing definition"
•
"Creating an event action with a pseudo event on the escalation policy"
•
"Creating an event action with a pseudo event on the resolving policy"
•
"Creating an event action with a pseudo event on the flapping policy"
The Event Actions dialog box displays.
the event.
By default, the Events pane of the Add Event Action dialog box displays.
The available pseudo events display.
The Sources pane of the Add Event Action dialog box displays.
Select the source that you will use to monitor this event from the Selected Sources list.
The Policy pane of the Add Event Action dialog box displays.
for the selected events when they occur.
The Action Group-Actions pane of the Add Event Action dialog box displays.
recipient if the policy criteria have been met.
The Action Group - E-mail Settings pane of the Add Event Action dialog box allows you to select
e-mail recipients from a list, add new e-mail recipients, and compose e-mail messages.
Available Recipients list, and click the right arrow button to move the recipient to the Selected
Recipients list.
NOTE
Make sure the user you select has an e-mail address defined in a user account.
on page 1280
32
Pseudo events
on page 1292
on page 1301
on page 1303
on page 1304
1301