Viewing Configuration Policy Manager Status - Brocade Communications Systems WFT-2D User Manual

31

Viewing configuration policy manager status

•
•
Viewing configuration policy manager status
You can view configuration policy manager status from the main Management application window
or from the Configuration Policy Manager dialog box.
The Management application enables you to view the configuration policy manager status at a
glance by providing a configuration policy manager status icon on the status bar.
illustrates and describes the icons that indicate the current status of the configuration policy
manager function.
TABLE 105
Icon
To view more detail regarding configuration policy manager status, click the Configuration Policy
Manager icon. The Configuration Policy Manager dialog box displays. For more information, refer to
"Viewing existing configuration policy managers"
1238
Rule — The default SAN policy is configured with the following rules:
-
Zoning status
-
Fan in Ratio
-
Event registration
-
Redundant connection
-
Management application backup enabled
Targets — The default SAN policy is configured with the following targets:
-
Fabric Checks — All Fabrics
-
Switch/Router Checks — All SAN Switches product group
Configuration policy manager icons
Description
Passed — Displays when all configuration policy managers, excluding un-alerted and
acknowledged monitors, pass. Pause on icon to display flyover detail: Configuration
policy manager is OK.
Failed — Displays when at least one configuration policy manager failed. Pause on icon to
display flyover detail: The last run of number configuration policy manager(s) has one or more
failures.
on page 1239.
Brocade Network Advisor SAN User Manual
Table 105
53-1003154-01