Monitoring A Flow Monitor Flow - Brocade Communications Systems WFT-2D User Manual

Selecting a LUN ID from a list of available LUNs
4. Use this dialog box to select the LUNs associated with discovered fabrics.
To select the LUN ID, complete the following steps.
1. Click the ellipses button to the right of the LUN field.
2. Select a LUN ID in the Available Products list and click the right arrow to move to the Selected
3. Click OK on the Select LUN dialog box.

Monitoring a Flow Monitor flow

To view the summary data for a Flow Monitor flow, complete the following steps.
1. Select the device on which you defined the flow and select Monitor > Fabric Vision > Flow >
2. Select a time interval for monitoring the flow in the Time duration list.
3. Select the flow that you want to monitor in the Flow Definitions table.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Select LUN dialog box displays with a list of fabrics with associated LUNs.
FIGURE 502
Select LUN dialog box
Products list.
Move the switch port back to the Available Products list by clicking the left arrow.
The selected LUN ID displays in the LUN field.
Monitor.
The Flow Vision dialog box displays pre-populated with a list of all defined flows in the Flow
Definitions table. For more information about the fields and components of the Flow
Definitions table, refer to
Possible values are 30 minutes, 1 hour, 6 hours, 12 hours, 1 day, 3 days, 1 week, and 1
month.
"Flows Definitions table fields and components"
29
Flow Monitor
on page 1134".
1149